TECHNICQLL - DIY ACCESSORIES

Manufacturers

Suppliers

Viewed products

1 x CLEAR ELASTIC STRONG ADHESIVE GLUE FABRICS COTTON, DENIM, FELT, JUTE, CANVAS High Quality 20ml TECHNICQLL NEW

R-116

New product

A BRAND NEW

1 x 20ml CLEAR ELASTIC STRONG ADHESIVE GLUE FABRICS COTTON, DENIM, FELT, JUTE, CANVAS etc

CLEAR / COLOURLESS AFTER DRYING


HIGH QUALITY PRODUCT

More details

40 Items

£9.99

More info

A BRAND NEW

1 x 20ml CLEAR ELASTIC STRONG ADHESIVE GLUE FABRICS COTTON, DENIM, FELT, JUTE, CANVAS etc

CLEAR / COLOURLESS AFTER DRYING


HIGH QUALITY PRODUCT




DESCRIPTION:

Flexible and very strong adhesive used for bonding various kinds of fabrics such as cotton, denim, felt, jute, canvas. Perfect for bonding patches on clothes in their chafing (elbows and knees) for example, sweaters, denim trousers, work clothes, Irreplaceable for sticking ornaments, emblems, repairing torn tents, screens, umbrellas, tarpaulins, as well as upholstery materials such as chairs, stools, sofas. Bonding finishing materials such as the edges of the curtains. Ideal for hobbyists. Fixed materials can be washed at 60 ° C, dry clean and iron. After drying is colorless.

Please note: This glue is not suitable for very thin fabrics and imitation, faux leather.



HOW TO USE:


Before use, check out in an invisible part of the material if adhesive does not damage the material to be repaired. Apply a layer of glue to dry, clean, surface of the fabric and spread evenly with a very thin layer using the supplied toothed spatula (make sure that the glue cover the entire area - including the edges and corners). After initial curing, appy a second layer of adhesive as previously immediately and uniformly. Make sure that the adhesive is not applied outside of gluing area. Press firmly for about 2 minutes. Preliminary curing is achieved after 30 minutes. The full strength of the connection is achieved after 12 hours. In case of bonding thin fabrics is better to apply the adhesive to both surfaces to be joined before gluing and leave for a few seconds for partial drying (to allow to evaporate the solvents). To increase the strength of the joint iron the materials bonded. Excess of adhesive should be removed mechanically using a cotton cloth soaked in white spirit.