|
A BRAND NEW
1 x EPOXY ADHESIVE GLUE FOR METALS (2 x 20ml tubes)
DESCRIPTION:
Two component adhesive for metals (iron, aluminium, non-ferrous metals and their
alloys and casts, steel, cast iron, bronze, brass and so on) so called “liquid
metal”. Creates a strong and durable joint resistant to chemical agents (oil,
petrol, acids) and temperature -30 to +70'C. Also bonds to stone, wood, plastic.
Perfect for filling losses and material combinations e.g. concrete to iron.
HOW TO USE:
Clean and degrease the surface to be bonded. Mix thoroughly the components A+B
in the volume proportion 1:1 and apply to the surfaces previously cleaned and
degrease. Full cure is obtained on a few hours. Initial cure is achieved in
approximately 90 min at 20'C. Heating the joint e.g. with a electrical dryer
makes repair time much shorter.
|